I've been internet ordering for years
and this has been my best experience!
The order was acknowledged quickly by email and updated
with tracking information. Not only was my order delivered in record
time, you emailed saving me from ordering incorrectly and later helped me with the installation,
too. I received parts that were all pretested and ready to install. Thank you so much for the great service.
Check your email for an order response.
Orders are verified. Tracking information
will be sent at the time of shipment. So please check your
email after ordering for the first email and daily for further emails
with information about your order. Thank you!
DISCOUNT SCOOTERS AND PARTS! SALES SINCE 1988. SEE PHONE NUMBERS AT THE BOTTOM OF THE PAGE
Chain can be purchased precut to length for your need by specifying the number of outside links and inches needed in the size chain, commonly #25, #25H, 8mm or BF05T, and #35. See the Chain
Chart for more information on Chain numbers. Chains are also available as premade OEM lengths for specific models. X-treme scooter model parts pages will list more OEM Chains. Chain can be purchased in general lengths with master links and offset links. Sprockets are available for motors and rear wheels in these chain sizes, too. Sprockets attach to motors and rear wheels in different ways and information is provided for measurements where required.
Popular Miscellaneous Parts for Scooters
#25 CHAIN for E5, E10/E36, X360 $17.95
Plus Shipping/Handling
#25 Chain size in 24, 25.5, and 28.5 inch lengths, OR in the message
area of the order specify your exact length specially cut with
included master link, under three feet, for #25 size. Each outside link is 1/2 inch, or
24 links per foot. See the Chain
Chart.Includes a master link (extras also sold separately
below.
CHAINS in #25, #25H, #BF05T (8mm), #35 SIZE. 3
FEET OR LESS, $15.95 EA, CUT TO LENGTH.
Plus Shipping/Handling
Be sure to include the length of your chain in the Message Area of
the order with the number of outside links and total inches preferred. See the Chain
Chart for more information.
CHAIN in #T8F (8mm) 29
INCHES OR LESS CUT TO LENGTH $21.95
Plus Shipping/Handling
Be sure to include the length of your chain in the Message Area of
the order with the number of outside links and total inches preferred. Use standard 8mm Master Links.
ADD $1.00 SHIPPING WHEN PURCHASE OF MASTERLINKS AND OFFSET LINKS IS UNDER $10 IN THE NEXT COLUMN
#25, #25H, #BF05T (8mm), #35 CHAIN MASTER and OFFSET LINKS
$1.99
Plus Shipping/Handling
Chain Master Links and Offset Links (offset extends by one link).
Pricing is per masterlink or offsetlink when ordered with a chain
or other items. Otherwise when ordering only links the minimal
shipping is $1.50 and must be included using the Shopping Cart
button below.
13 Tooth D-bore Sprocket For 5mm Belts
This 13 tooth 5mm belt sprocket fits most MY1016 style electric
scooter motors. This sprocket is designed for use with any 5mm
belts up to 15mm in width. Outter Diameter: 25mm (1.0 inches). Inner Diameter: 8mm (0.315
inches)
4 HOLE SPROCKETS FOR #25/25H/8MM
CHAIN $18.95 EACH
Plus Shipping/Handling
55, 65 and 80 tooth rear wheel sprockets for #25/25H Chain size and 44
tooth for 8mm (BF05T) chain. Standard 4 bolt mount at 47mm bolt
hole spacing and 54mm inner diameter (2 1/8 inch).
11 and 13 tooth sprocket for motors. 13 tooth is 1 1/2 diameter for increased speed. 11 tooth is 1 inch diameter. Double D is for MY1020 motors and 10mm shaft. D is for MY1016 motors and 8mm shaft. #25 chain.
9 TOOTH BICYCLE SPROCKET $13.95
Plus Shipping/Handling
9 tooth D bicycle chain sprocket for MY1016 motors. Outer Diameter: 1-5/8'' / 41mm, Inner Diameter: 0.393'' / 10mm. 1/2'' x 1/8'' bicycle chain is also referred to as 410 chain. This sprocket is designed for use with the MY1016 series of motors that have a 10mm single d-bore shaft.
11 TOOTH BICYCLE SPROCKET - $12.95
Plus Shipping/Handling
11 tooth double D bicycle chain sprocket for motors. Outer Diameter: 1-15/16'' / 48.8mm, Inner Diameter: 0.393'' / 10mm. 1/2'' x 1/8'' bicycle chain is also referred to as 410 chain. This sprocket is designed for use with the MY1020 series of motors that have a 10mm dual d-bore shaft.
11 - 15 TOOTH XYD MOTOR SPROCKET $12.95
Plus Shipping/Handling
This 11 - 15 tooth sprocket with 10mm bore is designed for use with most XYD style electric scooter motors and #25 chain. Includes retention pin. Outer Diameter: 1.0'' / 25mm, Inner Diameter: 3/8'' / 10mm.
CLUTCH BEARING, Freewheel Rear Wheel $19.95
Plus Shipping/Handling
Bearing type freewheel clutch, 4 hole mount (6mm bolt size) or 1 3/8 inch threaded (34mm). Bolt spacking 65.5mm. Outside diameter 77mm. Freewheels counterclockwise (inside clockwise). San You, and occasionally other manufacturers
CLUTCH SPROCKET, Freewheel Rear Wheel $19.95
Plus Shipping/Handling
16 Tooth Sprocket type free wheel hub found on may gas and electric scooters and vehicles. Uses 43-R1 Chain. ID: 31mm, OD: 69.25mm with teeth. OD without teeth: 54.35. 15mm Thickness. Threaded on inside. Freewheel direction is counter clockwise. San You, and occasionally other manufacturers
80 Tooth BELT SPROCKET, REAR WHEEL USE $24.95
Plus Shipping/Handling
80 tooth 5M Belt Sprocket for rear wheel use that screws on standard 1 3/8 rim threads. Accomodates belt widths of 15 to 20mm. Outer Diameter: 5-1/8" or 130mm; Inner Diameter: 1-3/8" or 35mm. Makes easy conversion of chain to belt use.
PARTS FOR THE X-TREME X-360 (AND SIMILAR) STOCKED LOCALLY
X360 Frame $29.95
plus shipping and handling
Heavy duty metal frame with kick stand. Use this chassis to build
your own scooter using the parts you select. It has a seat pole
support, and room for three 12volt 12amp batteries and electronics.
350 or smaller motors mount of the back area above the rear wheel,
but larger motors can mount under the chassis in front of the rear
wheel. Style lends itself to many user modifications. Typical body
cover available above. 30 pounds shipping weight due to oversize
carton. Actualy 15 pounds for use yet very well made for up to 250
pound rider.
Trunk Shell for X360 and Other Scooters -
$34.95
Plus shipping/handling
Colors may be limited at times. Specify color choice desired from
drop down menu below: Burgandy, Blue, Yellow, Black. Trunk does NOT
include hinge or lock.
Upper Handlebar for the original model
X-360 scooter. $24.95
plus shipping and handling
Complete Upper Handlebar compatible with the original X-360s!
We advise customer with other brand and model scooters to email us
prior to ordering for advisement.
A handlebar may appear compatible with other make scooters but be
totally incompatible and nonreturnable.
Our handlebar assembly can be used with most scooters when the
entire assembly is purchased - email for assistance.
Front Lower Forks with shocks for the
model X-360 scooter. $53.95
plus shipping and handling
Our lower Fork Assembly with Shocks!
We advise customer with other brand and model scooters to email us
prior to ordering for advisement.
A fork may appear compatible with other make scooters but be
totally incompatible and nonreturnable.
Our fork assembly can be used with most scooters when the entire
assembly is purchased - email for assistance.
Seat for All Scooters $19.95
Plus Shipping/Handling
Replacement seat for all scooters, plus Vapor, X-360 and X-11
Models. This item will also fit nearly every other similar looking
scooter or bicycle on the market.
Largest seat for all scooters $29.95
Plus Shipping/Handling
This is a large scooter / bicycle seat replacement. The quality is
good, the springs are great and it has good cushion. We offer 3
different seats, this is the best seat we offer. Higher quality
than picture indicates.
Seat Pole for X360 and Others $20.95
Plus Shipping/Handling
Replacement seat post for most scooter and the X-360 . This item
will also fit nearly every other similar looking scooter and many
bicycles on the market.
Tool Kit and Bag for Rad2Go and Vapor Electric scooter $13.95
Plus Shipping/Handling
Common tools used with the Rad2Go Electric scooters. Includes
reversable screw driver, #8/10 wrench, #11/14 wrench, #14/17
wrench, medium and large allen wrenches, zippered fabric pouch.
Gas Scooter Throttle Cable
$19.95
Plus Shipping/Handling
Universal Throttle Cable for most gas scooters
(common cable and housing - housing 64 inches in length)
CARBURETOR FOR 43CC, 49CC ENGINES
$29.95
plus shipping and handling
Carburetor used on 43cc and 49cc scooter engines commonly found on stand-up gas scooters, pocket bikes, mid/super pocket bikes, mini-choppers as well as some small ATVs and dirt bikes. Venturi Side Opening: 15mm, Bolt Hole Spacing: 31mm, Low speed adjustment, Air Fuel mixture adjustment. No returns, exchange, or allowance provided.
PULL START FOR 47CC, 49CC, 50CC ENGINES $19.95
plus shipping and handling
Replacement pull starter complete. Fits our XP-490, XG-470, XG-499, XG-505,
& XG-550 & ALL other brands that use a pull starter that
looks like the one pictured for 33 - 50cc engines. Most popular.
If you need help with any issues the first thing we ask you to do is contact us via one of the following methods and we can save you time! We want to help you before extra paperwork and expenses make a possible easy resolution take weeks, or even months to resolve. DO NOT CONTACT PAYPAL! Paypal is only a payment processor and an extra layer of paperwork. You certainly have this option available anytime in the future, but we can help take the correct steps for fastest resolution.
DO read the emails you have received from us because there is instructions for the quickest way to proceed based on the type of order you placed.
This is the FIRST step you should take after realizing there is an issue. Next email reply in that email at the top to tell us what the issue is.
These two simple steps will save everyone time and money!
If you have a technical question there are two ways to proceed. If you ordered an X-treme OEM Part or Scooter you can get free technical support using the X-TREME SUPPORT TICKET SYSTEM where you and a specialist dialog on the website to provide you help and warranty parts support using a ticket number. OEM Parts primarily come from this same location, too, saving time if a part needs replacing. If necessary, email us in reply to the email with the subject line OEM PART ORDER SHIPPING.
If you ordered and received one of our pretested universal parts from our own warehouse then reply to the email we sent with the subject line ORDER SHIPPING.
Feel free to CALL or TEXT MESSAGE us using our Parts
and Scooter Information Hotline at...
TEXT 281-317-7307 or CALL 281-997-6907 FOR GENERAL QUESTIONS Not Answered in our COMMON QUESTIONS FAQ
Or our SALES ONLY Hotline
where we can take Credit Card orders verbally
Note: Verbal Orders are more prone
to mistakes so use our Shopping Cart System
1-800-842-1225 ORDER ONLY HELP Monday through Friday
(Phone Order - Or Help using the Shopping Cart System)
High Volume Calls are answered by our
machine and your phone number is logged.
We will call USA customers back when you say CALL ME BACK after the beep!
Best time to call: Mid-Afternoon
Otherwise
EMAIL US for fastest help or if you need a link to a part.
Thanks for shopping with us, we
appreciate your business.
SUMMARY:
When electric scooters first became popular our
Throttles, Controllers, Control Boxes, Battery Chargers, Batteries,
Brake Levers, Switches, Key Switches, On Off and Kill Switches,
Fuses and Fuseholders, Lighting and Signals, and Common Scooter
Electrical Components were available for customers in need who
otherwise could not get parts for their model scooters.
Scooter throttles, battery chargers, control boxes were very hard
to find, and still are for quality parts. The difference in our
electrical parts from others' electrical scooter parts is that we
reject the cheap parts sometimes available to us. Plus, we test the
electrical parts we sell prior to shipping them to our customers,
adding a little bit to the price but insuring quality. Bottom line
- fast receipt of quality electrical and gas scooter parts!
NOTICE: PICTURES OF REPLACEMENT PARTS MAY VARY PRIOR TO UPDATES. PARTS ARE PROVIDED IN AS-IS CONDITION WITH NO REGARD TO SLIGHT COSMETIC IMPERFECTIONS DUE TO STORAGE OR HANDLING, AND PRODUCTION RUNS MAY SLIGHTLY ALTER THE APPEARANCE OF THE SAME PART FROM TIME TO TIME MAKING SLIGHT DIFFERENCES FOR MATCHING OF SEVERAL ITEMS IN AN ORDER (WHENEVER POSSIBLE WE MATCH AS CLOSELY AS POSSIBLE FOR ORDERS WHERE CUSTOMERS REQUEST THIS). ALL PARTS ARE INSPECTED AND TESTED AS POSSIBLE FOR QUALITY CONTROL PRIOR TO PACKAGING AND SHIPMENT OF CUSTOMER ORDERS. ALL SALES ARE FINAL WITH THE EXCEPTION OF NON-ELECTRICAL ITEM EXCHANGES FOLLOWING OUR TERMS OF SALE ORDER POLICIES FOR THE ORDERING OF INCORRECT PARTS. CUSTOMERS SHOULD ALWAYS TAKE ADVANTAGE OF OUR 24/7 EMAIL AND OTHER COMMUNCIATIONS FOR HELP PRIOR TO PLACING ORDERS, IF NEEDED. USA STANDARD SHIPPING IS INCLUDED IN THE PRICE OF PARTS ONCE ADDED TO THE SHOPPING CART THAT ALSO REPRESENTS THE HANDLING FEE FOR INTERNATIONAL ORDERS. INTERNATIONAL SHIPPING IS SEPARATE FOR EACH ORDER BASED ON INFORMATION PROVIDED ON OUR 'HOW TO PLACE AN ORDER' PAGE USING THE LINK IN THE ITEM DESCRIPTION. USA HANDLING IS ADDED TO EACH ORDER DURING CHECK-OUT TO ADJUST SHIPPING AND PROCESSING OF EACH USA ORDER. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND CUSTOMER WILL BE ADVISED IN THAT EVENT.
FOLLOW THESE INSTRUCTIONS FOR ANY ISSUES