SCOOTER MOTORS


MOTORS IN COMMON SIZES FOR ALL SCOOTERS
CLICK FOR NEW PAGE VIEW


When you Click the BUY NOW or ADD TO CART Button you will see the price with Shipping & Handling for the USA (Email for International) added to the item price listed. If shipping is free there will still be a small handling fee. DISREGARD ANY OTHER PAYPAL SHOPPING CART NOTICES FOR ADDITIONAL SHIPPING! Clicking the ADD TO CART or BUY NOW button to place an order indicates you have agreed to the order policy and procedures as printed on this web site.


How To Send A Money Order
Order FAQ    Low Price Guarantee
Email Us If You Need Help

Price Match Guarantee AND Immediate Fast Shipping of Quality Tested Parts Packaged to Arrive Safely!

Information to Consider on Parts,
Scooters, & Shopping Here!

ALTERNATE PAGE VIEW

ELECTRIC SCOOTER MOTOR INDEX

100 WATT, X10 USE, 24 VOLT, 3M PITCH BELT DRIVE, BOLT MOUNT

200 WATT, BELT, ELECTRIC MOTOR, BRACKET MOUNT

250 WATT, X11 USE, 24 VOLT, 5M PITCH BELT, BRACKET MOUNT

250 WATT, 24 VOLT, CHAIN, BRACKET MOUNT

300 WATT, 24 VOLT, BELT, ELECTRIC MOTOR, BRACKET MOUNT

350 WATTS, 24 VOLTS, CHAIN, BRACKET MOUNT

350 WATTS, X360/ALL USE, 36 VOLTS, CHAIN, BRACKET MOUNT

350 WATT, 36 VOLT, CHAIN, BRACKET BOLT MOUNT

400 WATT, 24 VOLT, CHAIN, ELECTRIC MOTOR, BAND OR BOLT MOUNT

500 WATT, 24 VOLT, CHAIN, ELECTRIC MOTOR, BAND OR BOLT MOUNT

500 WATT, 36 VOLT, CHAIN, ELECTRIC MOTOR, BAND OR BOLT MOUNT

750 WATT, 24 VOLT, CHAIN, ELECTRIC MOTOR, BAND OR BOLT MOUNT

750 WATT, 36 VOLT, CHAIN, ELECTRIC MOTOR, BAND OR BOLT MOUNT

750 WATT, 48 VOLT, CHAIN, ELECTRIC HUB MOTOR, IN REAR WHEEL

1000 WATT, 36 VOLT, CHAIN, ELECTRIC MOTOR, BAND OR BOLT MOUNT

1000 WATT, 48 VOLT, CHAIN, ELECTRIC MOTOR, BAND OR BOLT MOUNT

49CC GAS ENGINE, PULL OR ELECTRIC START

NOTE: 750 WATTS EQUALS ONE HORSEPOWER (HP)


COMPLETE SITE INDEX OF SCOOTERS AND PARTS

AVAILABILITY OF REPLACEMENT PARTS


REPLACEMENT PARTS PRICES SHOWN DO NOT INCLUDE SHIPPING/HANDLING. IT IS SHOWN ONCE ADDED TO THE SHOPPING CART. PICTURES OF REPLACEMENT PARTS MAY VARY PRIOR TO UPDATES





 Universal 24V 100 Watt Belt or Chain Drive Motor $44.95
plus shipping and handling
Click Here To Check Availability

(2 3/4" Diameter, 3 3/4" long, 4.85" long including Shaft)


Generic replacement 100 watt motor for model X-10 and Razor. Comes complete with 3M pitch belt hub, 12mm wide, or #25H Chain Sprocket (not interchangeable between belt or chain version). This item will fit in most other name brand scooters that have a 100 watt motor installed. 3300 rpm, 2700 with load. Rated Torsion: 0.35. 3 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Motor Choice

Parts are inspected and tested prior to packaging

 OEM 24V 100 Watt Belt or Chain Drive Motor $59.95
plus shipping and handling
Click Here To Check Availability

(2 3/4" Diameter, 3 3/4" long, 4.85" long including Shaft)


OEM replacement 100 watt motor for model X-10 and Razor. Comes complete with 3M pitch belt hub, 12mm wide, or #25H Chain Sprocket (not interchangeable between belt or chain version). This item will fit in most other name brand scooters that have a 100 watt motor installed. 3300 rpm, 2700 with load. Rated Torsion: 0.35. 3 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Motor Choice

Parts are inspected and tested prior to packaging
200 Watt 24 Volt Motor $49.95
plus s/h Click Here To Check AvailabilityIN STOCK
2750 RPM @ 24V 11.5A. 4" Diameter, 3" Wide, 4" Wide including Shaft, HTD 5M15 Pitch/width belt hub or 11 tooth #25 chain sprocket choice.
This is an excellent motor for speed improvement for all scooters. Vapor and other scooter replacement in the 150-200 watt range. You can interchange most small electric motors among most all models of 24 volt ELECTRIC SCOOTERS using 4 tap hole flange - Mount Picture. This motor is rated at 2750 RPM, 24 Volt, 11 amps. May be operated at greater or less voltage (life expectancy may be shortened). 4 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Motor Choice

  

Parts are inspected and tested prior to packaging

 BELT DRIVE MOTOR 250 watt 24 Volt 2650 RPM, 5M Pitch Belt Hub with mounting bracket $69.95
Plus Shipping and handling. Click Here To Check Availability
OEM Replacement for X-11 and X-250 and other scooters using 4 tap hole flange - Mount Picture.
Dimensions: 4" Diameter x 3 1/4" Long, 4 1/2 long including belt hub. May be operated at greater or less voltage (life expectancy may be shortened). 4 pounds.



READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

 CHAIN DRIVE MOTOR 250 WATT 24 VOLT $54.95
plus shipping/handling. Click Here To Check AvailabilityIN STOCK


250 watt, 24 volt, 10.5 amp, 2650 RPM. 4" Diameter, 3" Wide, 4" Wide including Shaft. Comes complete with sprocket for #25 chain and bracket attached with four hole tapped mount. This item will fit in most other name brand scooters that have a similar size chain drive motor installed. X-treme X11 and X250 replacement part. 5 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

 24V 350 Watt Chain Drive Motor with Mounting Bracket (4 bolt) $79.95
plus shipping/handling Click Here To Check AvailabilityIN STOCK
(4" Diameter, 4" Wide, 5" Wide including Shaft)


Hard to find, but a perfect 350 watt permanent magnet performance motor comes complete with 11 tooth sprocket for #25 chain. This item will fit in most name brand scooters that allow installation or replacement of a four tapped hole bracket mounted motor, replacing 200 watt to 350 watt chain drive installed motors. - Picture. This motor is rated at approximately 2650 RPM, 24 Volt, 19 amps. 6 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

 36V 350 Watt Chain Drive Motor with Mounting Bracket (4 bolt) $89.95
plus shipping/handling Click Here To Check AvailabilityIN STOCK
(4" Diameter, 4" Wide, 5" Wide including Shaft)


Hard to find, but a perfect 350 watt permanent magnet performance motor comes complete with 11 tooth sprocket for #25 chain. Produces a 600 watt output in torque and power. This bracket mounted motor will fit in most name brand scooters that allow installation or replacement of a four tapped hole bracket mounted motor, replacing 200 watt to 350 watt chain drive installed motors. - Picture. This motor is rated at approximately 2650 RPM, 36 Volt, 15 amps. X-treme X360 OEM Part. 6 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

 MOTOR 350 WATT 36 VOLT $67.95
plus shipping/handling. Click Here To Check AvailabilityIN STOCK


350 watt, 36 volt, 13 amp, 2650 RPM (Windings may be safely reduced to increase RPM). 4.375" Diameter, 5.75" Wide, 6.75" Wide including Shaft. Comes complete with sprocket for #25 chain. Band Mount. This item will fit in most other name brand scooters that have a similar size chain drive motor installed. May be operated at greater or less voltage (life expectancy may be shortened). 15 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

 MOTOR 500 WATT 24 VOLT $109.95
plus shipping/handling Click Here To Check Availability


500 watt, 24 volt, 27.5 amp, 2750 RPM. 4.375" Diameter, 5.75" Wide, 6.75" Wide including Shaft. Comes complete with 11 tooth sprocket for #25 chain. This item will fit in most other name brand scooters that have a similar size chain drive motor installed. May be operated at greater or less voltage (life expectancy may be shortened). Available with or without mounting bracket.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Motor Choice

Parts are inspected and tested prior to packaging

 MOTOR 500 WATT 36 VOLT $109.95
plus shipping/handling Click Here To Check Availability


500 watt, 36 volt, 18.3 amp, 2500 RPM (windings can safely be reduced to increase RPM). 4.25" Diameter, 5.5" Wide, 6.5" Wide including Shaft. Comes complete with sprocket for #25 chain. This item will fit in most other name brand scooters that have a similar size chain drive motor installed. May be operated at greater or less voltage (life expectancy may be shortened). 15 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

 MOTOR 500 WATT 48 VOLT $109.95
plus shipping/handling Click Here To Check Availability


500 watt, 48 volt. 4.25" Diameter, 5.5" Wide, 6.5" Wide including Shaft. Comes complete with sprocket for #25 chain. A powerful motor with low amps at 48 volts. This band mounted motor will fit in most other name brand scooters that have a similar size chain drive motor installed. May be operated at greater or less voltage (life expectancy may be shortened). Used in the X-500 X-treme Scooter. 15 pounds.
READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

750 WATT 24 VOLT MOTOR $139.95
plus shipping and handling Click Here To Check Availability


24V 750W Motor, Rated Speed: 2600R/MIN, Rated Current: 28 AMP, 11 Tooth #25/25H Sprocket, Shaft Diameter: 10mm, 2-pin male Plug, Wire Length: 26 inches, Outer Diameter (motor): 101mm or 4 inches, Overall Length (including shaft): 109mm. Model: XYD-6B as used on Currie Scooters and other makes and models with flange or band mount.


HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.




750 WATT 24 VOLT MOTOR $159.95
WITH SHIPPING (Handling Added Later)

Parts are inspected and tested prior to packaging
Motor, Rear Wheel Hub for Pantera, etc, 750 watt 48 Volt Motor $159.95
plus shipping Click Here To Check Availability
750w rear motor-wheel assembly for full-size, 48v electric scooters. 750 watt rear hub motor assembly. Includes wheel rim, hub motor and wiring. Specifications: Tire size 3.00 - 10, 5 Pin Connector, 3 single pin wires blue, green, yellow. Supported Models - Various unlisted makes/models like Panterra (Freedom electric), Panterra (Fusion electric), Panterra (Retro Electric), X-Treme. 30 pounds ships for over $30.
MATCHING CONTROL BOX - 48 VOLT TO 12 VOLT CONVERTER
3.00-10 TIRE AND/OR TUBE


READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging
Motor 750 watt 36 Volt Motor, Chain Drive $139.95
plus s/h Click Here To Check Availability
2800 rpm, 27 amp, permanent magnet motor, 12 guage motor leads, 11 tooth sprocket for #25 chain. Dimensions: 4-1/4" W x 5-1/2" L not including shaft. 4-1/2" W x 6-1/2" L including shaft.
Band Mounted Motor where the band is mounted to the frame of the scooter; also has two tapped holes for bolting on each end. May be operated at greater or less voltage (life expectancy may be shortened). ADD $10 TO ORDER THIS MOTOR WITH ATTACHED MOUNTING BRACKET using the ADD TO CART BUTTON below.


READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

ADD ATTACHED MOUNTING BRACKET TO THIS MOTOR FOR $10.00


Motor 1000 watt 36 Volt Motor, Chain Drive $149.95
plus s/h Click Here To Check Availability
36 Volt, 1000 Watt, 3000 RPM, 35 Amp, permanent-magnet motor. 12 gauge power leads. Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft. Shaft is 15/32 diameter. Sprocket included is for 8mm T8F chain. Order #25 chain double D motor sprocket here. 11 pounds. Also available with attached mounting bracket for $10. Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes. Mounting holes 4'' center to center across and 2-1/4'' center to center across.


READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging

ADD ATTACHED MOUNTING BRACKET TO THIS MOTOR FOR $10.00


Motor 1000 watt 48 Volt Motor, Chain Drive $159.95
plus s/h Click Here To Check Availability
48 Volt, 1000 Watt, 3000 RPM, 27 Amp, permanent-magnet motor. 12 gauge power leads. MY1020. Dimensions: 4-1/4'' W x 6'' L not including shaft. 4-1/4'' W x 7'' L including shaft. Shaft is 15/32 diameter. Sprocket included is for 8mm T8F chain. Order #25 chain double D motor sprocket here. 11 pounds. Also available with attached mounting bracket for $10. Mounting bracket measures 4-3/4'' x 2-7/8'' with 4 mounting holes. Mounting holes 4'' center to center across and 2-1/4'' center to center across.


READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging Parts are inspected and tested prior to packaging

ADD ATTACHED MOUNTING BRACKET TO THIS MOTOR FOR $10.00


   11 TOOTH SPROCKET - $9.95
Plus Shipping/Handling. Click Here To Check Availability
11 and 13 tooth sprocket for motors. 13 tooth double-D is 1 1/2 diameter for increased speed, Outer Diameter: 1-1/2" / 38mm, Inner Diameter: 0.3937", 10mm shaft, fits most MY1020 style electric scooter motors. 11 tooth double-D is 1 inch diameter. Outer Diameter: 25.5mm, Inner Diameter (flat edge to edge): 8.6mm for 10mm shaft, fits most MY1020 style electric scooter motors. 11 Teeth D is Outer Diameter: 25mm, Fits 8mm shaft, fits most MY1016 style electric scooter motors for X-Treme, SUNL, Various unlisted makes/models, Roketa, Terminator, Boreem Jia, E-scooter, Electra Scoot-N-Go, Freedom models. #25 or #25H chain.

HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Sprocket Type

Parts are inspected and tested prior to packaging
 11 - 15 TOOTH XYD MOTOR SPROCKET - $12.95
Plus Shipping/Handling. Click Here To Check Availability
This 11 - 15 tooth sprocket with 10mm bore is designed for use with most XYD style electric scooter motors and #25 chain. Includes retention pin. Outer Diameter: 1.0'' / 25mm, Inner Diameter: 3/8'' / 10mm.

HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Sprocket Type

Parts are inspected and tested prior to packaging
 9 TOOTH BICYCLE SPROCKET - $13.95
Plus Shipping/Handling. Click Here To Check Availability
9 tooth D bicycle chain sprocket for MY1016 motors. Outer Diameter: 1-5/8'' / 41mm, Inner Diameter: 0.393'' / 10mm. 1/2'' x 1/8'' bicycle chain is also referred to as 410 chain. This sprocket is designed for use with the MY1016 series of motors that have a 10mm single d-bore shaft.

HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging
 11 TOOTH BICYCLE SPROCKET - $12.95
Plus Shipping/Handling. Click Here To Check Availability
11 tooth double D bicycle chain sprocket for motors. Outer Diameter: 1-15/16'' / 48.8mm, Inner Diameter: 0.393'' / 10mm. 1/2'' x 1/8'' bicycle chain is also referred to as 410 chain. This sprocket is designed for use with the MY1020 series of motors that have a 10mm dual d-bore shaft.

HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging

 13 TOOTH BELT HUB - $9.95
Plus Shipping/Handling. Click Here To Check Availability
13 Tooth D-bore Sprocket For 5mm Belts
This 13 tooth 5mm belt sprocket fits most MY1016 style electric scooter motors. This sprocket is designed for use with any 5mm belts up to 15mm in width.
Outter Diameter: 25mm (1.0 inches). Inner Diameter: 8mm (0.315 inches)

HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging
CLUTCH BEARING, Freewheel Rear Wheel $19.95
Plus Shipping/Handling. Click Here To Check Availability
Bearing type freewheel clutch, 4 hole mount (6mm bolt size) or 1 3/8 inch threaded (34mm). Bolt spacking 65.5mm. Outside diameter 77mm. Freewheels counterclockwise (inside clockwise). San You, and occasionally other manufacturers



HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging
CLUTCH SPROCKET, Freewheel Rear Wheel $19.95
Plus Shipping/Handling. Click Here To Check Availability
16 Tooth Sprocket type free wheel hub found on may gas and electric scooters and vehicles. Uses 43-R1 Chain. ID: 31mm, OD: 69.25mm with teeth. OD without teeth: 54.35. 15mm Thickness. Threaded on inside. Freewheel direction is counter clockwise. San You, and occasionally other manufacturers



HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging

50cc Engine Electric Start & pull start complete, turn key ready $169.95
plus s/h Click Here To Check Availability
Certified 50cc engine that may be used for a large variety of scooter applications. Engines are brand new and not refundable or returnable. Transmission sold separately or purchase engine and transmission together below and save!


READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging


Item # xg-210/xuniv211/212
Certified 49/50cc Engine with Transmission

Centrifugal Clutch built inside transmission. This item fits many other brands of scooters. Engines are brand new and not refundable or returnable.
$249.95 Each plus s/h

Parts are inspected and tested prior to packaging



Item # xunig-211 Transmission For XG-499 with attachment retaining clip. Centrifugal Clutch built inside. This item fits many other brands of scooters.
$79.95 Each plus s/h

Parts are inspected and tested prior to packaging



Item # xunig-211 Transmission Snap/Keeper Ring
$8.95 Each plus s/h

Parts are inspected and tested prior to packaging


PULL START FOR 47CC, 49CC, 50CC ENGINES $19.95 ON SALE
plus s/h Reg $36.95 Click Here To Check Availability
Replacement pull starter complete. Fits our XP-490, XG-470, XG-499, XG-505, & XG-550 & ALL other brands that use a pull starter that looks like the one pictured for 33 - 50cc engines. Most popular.


READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging
UPGRADED PULL START FOR 47CC, 49CC, 50CC ENGINES $57.95
plus s/h Click Here To Check Availability
Upgraded, higher quality, stronger pull starter than the original for 33 - 50cc engines. Most popular.


READ IMPORTANT INFORMATION ON PLACING USA AND INTERNATIONAL ORDERS HERE
International Customers: Save Time and Pay Your Shipping Fee Here with the Order

Parts are inspected and tested prior to packaging
STARTER PAWL CUP FOR 47CC, 49CC, 50CC ENGINES $6.95
plus s/h Click Here To Check Availability
Starter pawl cup. For 33 - 50cc engines. Most common type!



HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging
STARTER PAWL FOR CUP 47CC, 49CC, 50CC ENGINES $4.95
plus s/h Click Here To Check Availability
Starter pawl for cup. For 33 - 50cc engines. Most common type!



HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging
STARTER PAWL FOR 47CC, 49CC, 50CC ENGINES $6.95
plus s/h Click Here To Check Availability
Starter pawl. For 33 - 50cc engines. Most common type!



HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging

CARBURETOR FOR 43CC, 49CC ENGINES $24.49
plus s/h Click Here To Check Availability
Carburetor used on 43cc and 49cc scooter engines commonly found on stand-up gas scooters, pocket bikes, mid/super pocket bikes, mini-choppers as well as some small ATVs and dirt bikes. Venturi Side Opening: 15mm, Bolt Hole Spacing: 31mm, Low speed adjustment, Air Fuel mixture adjustment. No returns, exchange, or allowance provided.



HOW TO PLACE
AN ORDER.

PAY YOUR UNPAID
INTERNATIONAL SHIPPING.


Parts are inspected and tested prior to packaging

PICTURES OF REPLACEMENT PARTS MAY VARY PRIOR TO UPDATES. PARTS ARE PROVIDED IN AS-IS CONDITION WITH NO REGARD TO SLIGHT COSMETIC IMPERFECTIONS DUE TO STORAGE OR HANDLING, AND PRODUCTION RUNS MAY SLIGHTLY ALTER THE APPEARANCE OF THE SAME PART FROM TIME TO TIME MAKING SLIGHT DIFFERENCES FOR MATCHING OF SEVERAL ITEMS IN AN ORDER (WHENEVER POSSIBLE WE MATCH AS CLOSELY AS POSSIBLE FOR ORDERS WHERE CUSTOMERS REQUEST THIS). ALL PARTS ARE INSPECTED AND TESTED AS POSSIBLE FOR QUALITY CONTROL PRIOR TO PACKAGING AND SHIPMENT OF CUSTOMER ORDERS. ALL SALES ARE FINAL WITH THE EXCEPTION OF NON-ELECTRICAL ITEM EXCHANGES FOLLOWING OUR TERMS OF SALE ORDER POLICIES FOR THE ORDERING OF INCORRECT PARTS. CUSTOMERS SHOULD ALWAYS TAKE ADVANTAGE OF OUR 24/7 EMAIL AND OTHER COMMUNCIATIONS FOR HELP PRIOR TO PLACING ORDERS, IF NEEDED. USA STANDARD SHIPPING IS INCLUDED IN THE PRICE OF PARTS ONCE ADDED TO THE SHOPPING CART THAT ALSO REPRESENTS THE HANDLING FEE FOR INTERNATIONAL ORDERS. INTERNATIONAL SHIPPING IS SEPARATE FOR EACH ORDER BASED ON INFORMATION PROVIDED ON OUR 'HOW TO PLACE AN ORDER' PAGE USING THE LINK IN THE ITEM DESCRIPTION. USA HANDLING IS ADDED TO EACH ORDER DURING CHECK-OUT TO ADJUST SHIPPING AND PROCESSING OF EACH USA ORDER. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND CUSTOMER WILL BE ADVISED IN THAT EVENT.


SUMMARY OF SCOOTER PARTS:

When electric scooters first became popular our Electric scooter motors, 24 and 36 volt, in watt sizes of 100, 200, 250, 300, 400, 500, 600, and 800 with belt drive hubs or chain drive sprockets, band or bracket mounted for all electric scooters were available for customers in need who otherwise could not get electric motors for their model scooters. Many electric motors were hard to find with the right voltage, wattage, and type drive (chain or belt) that was needed. The electric DC motors we now offer are an excellent selection of electric scooter motors. Bottom line - fast receipt of quality tested motors for your electric scooter!

SCOOTER MOTORS